Thursday, November 18, 2010

Image Transfer in Electroformed Bezel

I wanted to try a couple of things here.  First I made a bezel using the CaBezel mold, baked it and then electroformed it with a light coating of copper.  That came out looking terrific.  I put a Jax Brown patina on it to give it a slightly antique look.  Next I wanted to see if I could make a cabochon with an image transfer.   I put the image transfer on raw clay, then placed the CaBezel mold for the cabochon over it.  Placement was easy because you can see through the mold.  The image came out great - no distortion and it didn't stick to the mold (unlike the first one when I forgot to use water as a release.  LOL.  Guess I was in a hurry to see if it would work).  The cab is quite small, only 7/8 by 1 and 1/4 inches, but I got a lot of nice detail in the image.  Next I put the cab into the bezel and gently smoothed the top edges down to cover the cut sides of the clay and make it completely fill the bezel.  That little bit of extra space and the process of smoothing down the top is what gives it a real cabochon look.  I purposely didn't make the cab super thick because I knew I would be stretching the image in order to smooth the edges.  After that I baked it, sprayed it with PYMII to protect the transfer and keep the copper from darkening further and VOILA!  (That's for my Francophone Clayamie friends.)



For anyone interested in the CaBezels, they are available exclusively at Shades of Clay.

4 comments:

  1. Very nice Cynthia! I love how you combined the electroforming process with the cabezels! Very unique!

    ReplyDelete
  2. And I love what you are doing with electroforming! Talk about possibilities.

    ReplyDelete
  3. VERY cool- I know one demo I hope is on the Morrisberg roster...

    gera

    ReplyDelete